SchleTek Bore cleaner, 200 ml
Description
An acid & ammonia-free barrel cleaner with a 4-beam probe
User manual:
Bore-Cleaner comprises of several high quality cleaning agents and complexes, especially developed to clean barrels. Bore-Cleaner penetrates and removes dirt such as: Tombac, copper, zinc, gunpowder residue, lead and oil. Acid & ammonia-free.
Processing:
Can be used on both long and short weapons. Enter the 4-beam probe into the barrel. Spray evenly and pull the probe out of the barrel at a constant speed. If the barrel has not been fully sprayed with Bore-Cleaner, enter the 4-beam probe on the other side of the barrel and repeat the process. Leave the Bore-Cleaner to soak for 6.5 minutes. Afterwards, clean the barrel with a brush or a felt cloth. Repeat the process for stubborn dirt.
Safety precautions:
The visor cleaner can is pressurised. Store in a dark place and do not expose to temperatures exceeding 50 degrees Celsius or leave in direct sunlight. Do not forcibly break open, disassemble, or incinerate this can after use. Content may not be sprayed into open flames or onto glowing elements. Not to be uses indoors. Toxic to aquatic organisms, may cause long-term harm in water. Vapours may cause dizziness. Keep out of reach of children. Store in a cool place. Keep away from sources of ignition. No smoking. Do not breathe in gas, smoke vapours, aerosol. Do not flush product into drain or in open sewage. Not to be used in a electrostatic environment. Always wear gloves and take other safety precautions, in loose sand, carbon monoxide and gunpowder/pulverisors. Do not mix with water.
Made in Germany.