+371 2022 8895 
info@lynxgear.lv
MoG Target Combat 9106 – Light Combat Tactical Gloves (DexSuede + D3O®)
Description
MoG Target Combat 9106 – Light Combat Tactical Gloves (DexSuede + D3O®)
The MoG Target Combat 9106 is a lightweight, synthetic combat glove built for maximum dexterity and control in professional tactical use. Based on the key features of the Target Light Duty line, it is enhanced with D3O® impact protection on the knuckles for added safety during dynamic operations.
Designed for armed forces, law enforcement and special forces, the 9106 features an extremely finger-sensitive, slim fit construction for confident weapon handling, radio use and precise work with delicate equipment. The palm uses MoG / AX® DexSuede – a very thin synthetic suede that maintains outstanding feel while also offering contact heat resistance of 100°C for 10 seconds.
Key Features
- DexSuede Palm: Ultra-thin synthetic suede for maximum dexterity and finger sensitivity.
- Heat Resistance: DexSuede protects against contact heat of 100°C for up to 10 seconds (palm area).
- Extreme Finger Sensitivity: Slim-fit fingers stitched over the fingertips for precise weapon handling and equipment operation.
- Trigger Guard Reinforcements: Higher durability and comfort in high-wear areas.
- 2 Flex Joints (Index Finger): Increased flexibility for trigger control and weapon manipulation.
- C-Grip Construction: Improves durability and helps protect the index finger from hot barrel contact.
- Reload Thumb Design: Reinforced thumb patch supports smooth magazine changes.
- Reinforced Heel Patch: Extra strength against friction during operations.
- Breathable Back Fabric: Durable, 4-way stretch, quick-drying material.
- D3O® Knuckle Protector: Impact protection level 1, covered with double-layer Cordura® stretch for abrasion resistance.
- Neoprene Cuff with Watch Cutout: Comfortable wrist fit and freedom of movement.
- Secure Closure: High-quality hook & loop closure covered with TPR; double stitched and resistant to dust/sand.
- Touchscreen Compatible: Conductive suede patches on thumb, index and middle fingers.
- Silicone Grip Print: Enhanced grip on weapons, ropes, textiles and wet/sweaty surfaces.
Certification & Standards
- PPE Category II – protection against moderate risks (EU) 2016/425
- EN ISO 21420:2020 – general requirements for protective gloves
- EN 388:2016 + A1:2018 – 2121XP (mechanical protection)
- EN 407:2020 – X1XXXX (thermal protection – contact heat level 1)
EN 388 rating 2121XP indicates performance levels for abrasion, cut (coup test), tear and puncture resistance; letters indicate additional test results (TDM cut test).
Intended Use
- Professional tactical use: weapon handling, patrolling and related operations
- Radio and equipment operation requiring high precision
- Basic impact protection for accidental knocks on the knuckle area
These gloves are not intended to protect against high-impact mechanical risks (severe cuts/punctures) or chemical, biological and electrical hazards. No flame protection is claimed; avoid contact with open flame.
Available Colors
- Black
- Coyote Brown
- Wolf Grey
Available Sizes
Unisex model – sizes 6 (XS) to 12 (3XL).
Size Chart (mm)
| Size | Hand Circumference | Hand Length | Glove Length |
|---|---|---|---|
| 6 - XS | 160 | 165 | 200 |
| 7 - S | 170 | 170 | 205 |
| 8 - M | 200 | 180 | 215 |
| 9 - L | 210 | 185 | 225 |
| 10 - XL | 230 | 195 | 230 |
| 11 - 2XL | 260 | 205 | 235 |
| 12 - 3XL | 280 | 215 | 240 |
How to measure:
• Measure hand circumference around the knuckles (without the thumb).
• Measure hand length from the wrist crease to the tip of the middle finger.
Care & Maintenance
- Not machine washable. Clean with a damp cloth or rinse with mild/cold water and hang dry.
- Always inspect before and after use (seams, holes, cracks, discoloration, worn parts).
- Do not repair damaged gloves – replace if damage or serious contamination is detected.
- Store in a cool, dry, dark place in original packaging; avoid direct sunlight.
User Manual
EU Declaration of Conformity
Download EU Declaration of Conformity (PDF)
FAQ
Are these gloves touchscreen compatible?
Yes. The thumb, index and middle fingers have conductive suede patches for touchscreen use.
Do they protect against heat?
They offer basic contact heat protection on the palm area: DexSuede can protect against 100°C for up to 10 seconds. They are not flame resistant and should not be exposed to open flame.
What does the D3O® knuckle protection do?
The D3O® knuckle protector provides impact protection level 1 for accidental bumps and knocks while keeping a slim, flexible profile.
Can I use these gloves with chemicals?
No. These gloves are not designed for chemical protection and should not be exposed to chemicals.
Glossary
- DexSuede: Thin synthetic suede engineered for high dexterity and tactile feedback.
- D3O®: Impact-absorbing material used in protective gear, designed to soften and disperse energy on impact.
- C-Grip Construction: Reinforced design improving durability and helping protect the index finger area during weapon handling.
- EN 388: European standard for protective gloves against mechanical risks.
- EN 407: European standard for protective gloves against thermal risks (heat and/or fire).
- PPE Category II: Personal protective equipment for protection against moderate risks, requiring certified conformity.
Manufacturer / GPSR Information
Masters of Gloves BV
Nederweg 4
8870 Izegem
Belgium
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.MoGgloves.com
Specifications may change without notice as part of continuous product development.