+371 2022 8895 
info@lynxgear.lv
Mechanix Coldwork™ M-Pact® – Insulated Impact Winter Work Gloves
Description
Mechanix Coldwork™ M-Pact® – Insulated Impact Winter Work Gloves
When temperatures drop and the job doesn’t stop, reach for the Mechanix Coldwork™ M-Pact® gloves. Designed for cold-weather performance, these insulated work gloves combine impact protection, wind resistance, and dexterity to keep your hands protected and productive.
Featuring 60 g 3M™ Thinsulate™ Eco insulation, a laminated wind barrier, and water-resistant E-Suede back of hand, the Coldwork™ M-Pact® helps retain warmth while blocking cold air. An anatomical Thermoplastic Rubber (TPR) exoskeleton meets ANSI 138 Level 2 impact protection, making these gloves suitable for demanding industrial environments.
Key Features
- ANSI 138 Level 2 impact protection: TPR knuckle and finger guards.
- 60 g 3M™ Thinsulate™ Eco insulation: Traps warm air and regulates body temperature.
- Water-resistant E-Suede back: Helps prevent cold air and moisture intrusion.
- Laminated wind barrier: Enhances wind resistance.
- D3O® palm padding: Absorbs and dissipates high-impact energy.
- Armortex® reinforcements: Added durability on palm and thumb saddle.
- Touchscreen capable synthetic leather: Maintain device control without removing gloves.
- Dual-layer fingertip reinforcement: Extra durability on index finger and thumb.
- TPR wrist closure: Secure fit.
- Machine washable
- Removable spring clip: Keeps gloves paired during storage.
Certification & Standards
- EN ISO 21420:2020 – General requirements for protective gloves
- EN 388:2016 + A1:2018 – 2 1 2 1 X
- EN 511 – Cold protection: 1 1 X
- ANSI 138 Level 2 – Impact protection
EN 388 Performance Levels:
Abrasion: 2 | Cut (Coup): 1 | Tear: 2 | Puncture: 1 | TDM Cut: X
EN 511 Cold Protection:
Convective cold: 1 | Contact cold: 1 | Water penetration: X
Intended Uses
- Maintenance & Repair
- Construction
- Carpentry & Woodwork
- Towing & Transportation
- Oil & Gas
- Mining
Specification
- Weight: approx. 215 g per pair (size M)
- Features: Winter Insulated, Water Resistant, Impact Resistant, Touchscreen Capable, Machine Washable
Materials
Palm: Synthetic leather (60% Nylon, 38% Polyurethane, 2% carbon-based fibers)
Back of Hand: Fleece (100% Polyester), fabric (60% Cotton, 40% Nylon)
Thumb: Fleece (100% Polyester), rubberized synthetic fabric (87% PVC, 13% PET)
Fingers: Synthetic leather (60% Nylon, 38% Polyurethane, 2% carbon-based fibers)
Lining: Tricot (100% Polyester), 3M™ Thinsulate™ C40 (65% Olefin, 35% Polyester)
Size Chart (cm)
How to measure:
• Finger Length – measure from base of finger to tip.
• Palm Width – measure across palm at widest point.
| Size | Finger Length (cm) | Palm Width (cm) |
|---|---|---|
| XXX-Small | 9.8 – 10.8 | < 5.1 |
| XX-Small | 10.8 – 11.4 | 5.1 – 5.7 |
| X-Small | 11.4 – 12.4 | 5.7 – 6.4 |
| Small | 12.4 – 13.0 | 6.4 – 7.6 |
| Medium | 13.0 – 13.7 | 7.6 – 8.6 |
| Large | 13.7 – 14.6 | 8.6 – 9.8 |
| X-Large | 14.6 – 15.2 | 9.8 – 11.1 |
| XX-Large | 15.2 – 15.9 | 11.1 – 12.1 |
| XXX-Large | 15.9 – 16.5 | 12.1 – 13.7 |
If you are between sizes, sizing down is recommended for a snug fit. Winter insulated gloves and model NSLE-55 run slightly small.
Documents
Glossary
- ANSI 138: American standard for impact protection performance.
- D3O®: Advanced impact-absorbing material that dissipates energy upon impact.
- 3M™ Thinsulate™: Lightweight insulation material designed to retain warmth without bulk.
- Armortex®: High-durability reinforcement material used in high-wear areas.
Manufacturer
Mechanix Wear EMEA SLU
Carrer Diputacio 256, 2o 2a
08007 Barcelona
Spain
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Specifications may change without notice as part of continuous product development.