Description

Ballistol Silicone Spray – Lubrication Without Oil and Grease

Ballistol Silicone Spray is a versatile, clean and odorless silicone-based product that works as a lubricant, release agent, insulating agent and care product. It is designed for mineral oil-free lubrication and surface protection on many material-compatible parts such as rubber, plastic, wood, leather (including artificial leather), as well as metal, glass and textiles. The silicone layer is invisible, non-sticky and creates a durable protective film in a wide temperature range of -50°C to +200°C.

What Makes Silicone Spray Different?

• Mineral oil-free lubrication – clean alternative to oils and greases
• Low surface tension – wets surfaces very well for even coverage
• Water- and dirt-repellent – helps protect against moisture and contamination
• Non-sticky protective layer – does not leave a greasy film
• Stable temperature performance from -50°C to +200°C
• Also useful as a release agent to prevent sticking and adhesion

Typical Use Cases

Rubber & Seals (Car, Home, Outdoor)

• Door and window seals: helps keep rubber supple and reduces freezing and embrittlement
• Refrigerator/freezer seals: suitable for low temperatures to keep seals flexible
• Garage doors & roller shutters: reduces squeaks and improves sliding in guide rails

Vehicle Care & Maintenance

• Exterior plastic trims: helps refresh appearance and reduce brittleness caused by weather/UV exposure
• Wiper rubber care: apply to a cloth (not directly to the windshield) to help reduce smearing and jerking
• Seat belt retraction: mineral oil-free lubrication can help improve retraction without oily residues
• Window rubbers: apply via cloth to reduce squeaking and maintain flexibility

Workshop, Industry & Outdoor Gear

• Release agent: helps reduce sticking in presses, casting, and assembly tasks
• Assembly aid: useful for hoses, pipes, O-rings, fittings where reduced friction helps
• Insulating & moisture protection: can protect certain electrical parts from moisture (not a contact cleaner)
• Textile impregnation (limited use): can help make some synthetic surfaces more water-repellent (for pure waterproofing, dedicated impregnation sprays may be preferred)

Important Notes – What NOT to Use It For

• Not for V-belts: reduces friction and can cause slipping (belt may stop squeaking but won’t work correctly)
• Not for tire treads or brakes: silicone is a lubricant; use only very carefully on tire sidewalls via a cloth if needed
• Not for pedals: slip risk
• Not a contact spray: silicone insulates; contact sprays are meant to improve electrical conductivity
• Coating/painting warning: silicone is difficult to remove; surfaces planned for painting, coating or gluing must be silicone-free

How to Apply Correctly

1. Ensure the surface is dry, clean and grease-free.
2. Shake the can well before use.
3. Spray evenly from about 25 cm distance.
4. Allow to dry, then optionally buff with a soft clean cloth.
5. Repeat if needed to increase effect.

Key Features at a Glance

• Lubricant + release agent + insulating spray + care product
• Mineral oil-free, clean lubrication without grease residue
• Helps prevent rubber freezing and drying out
• Water-repellent, dust-repellent, anti-static effect
• Helps reduce squeaks and friction in many applications
• Stable protective film from -50°C to +200°C

Safety Information (CLP/GHS)

Signal word: Danger

• H222: Extremely flammable aerosol.
• H229: Pressurized container: may burst if heated.
• H315: Causes skin irritation.
• H335: May cause respiratory irritation.
• H336: May cause drowsiness or dizziness.
• H411: Toxic to aquatic life with long lasting effects.

Precautionary Statements

• P101: If medical advice is needed, have product container or label at hand.
• P102: Keep out of reach of children.
• P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• P211: Do not spray on an open flame or other ignition source.
• P251: Do not pierce or burn, even after use.
• P261: Avoid breathing dust/smoke/gas/mist/vapours/aerosol.
• P271: Use only outdoors or in a well-ventilated area.
• P302 + P352: IF ON SKIN: Wash with plenty of water.
• P405: Store locked up.
• P410 + P412: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
• P501: Dispose of contents/container in accordance with local/national/international regulations.

FAQ

Glossary

• Silicone: A synthetic polymer with water-repellent, lubricating and releasing properties; forms a stable protective layer on many surfaces
• Release agent: A substance that prevents sticking/adhesion between materials, useful in presses, molding, and tight contact areas
• Insulating agent: Material that reduces electrical conductivity and helps protect components from moisture-related leakage currents
• CLP/GHS: EU/UN system for classification and labeling of chemical hazards

Manufacturer / GPSR Information

F.W. Klever GmbH
Hauptstraße 20
84168
Germany
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Specifications may change without notice as part of continuous product development.