Description

MoG Target Combat 9106 – Light Combat Tactical Gloves (DexSuede + D3O®)

The MoG Target Combat 9106 is a lightweight, synthetic combat glove built for maximum dexterity and control in professional tactical use. Based on the key features of the Target Light Duty line, it is enhanced with D3O® impact protection on the knuckles for added safety during dynamic operations.

Designed for armed forces, law enforcement and special forces, the 9106 features an extremely finger-sensitive, slim fit construction for confident weapon handling, radio use and precise work with delicate equipment. The palm uses MoG / AX® DexSuede – a very thin synthetic suede that maintains outstanding feel while also offering contact heat resistance of 100°C for 10 seconds.

Key Features

• DexSuede Palm: Ultra-thin synthetic suede for maximum dexterity and finger sensitivity.
• Heat Resistance: DexSuede protects against contact heat of 100°C for up to 10 seconds (palm area).
• Extreme Finger Sensitivity: Slim-fit fingers stitched over the fingertips for precise weapon handling and equipment operation.
• Trigger Guard Reinforcements: Higher durability and comfort in high-wear areas.
• 2 Flex Joints (Index Finger): Increased flexibility for trigger control and weapon manipulation.
• C-Grip Construction: Improves durability and helps protect the index finger from hot barrel contact.
• Reload Thumb Design: Reinforced thumb patch supports smooth magazine changes.
• Reinforced Heel Patch: Extra strength against friction during operations.
• Breathable Back Fabric: Durable, 4-way stretch, quick-drying material.
• D3O® Knuckle Protector: Impact protection level 1, covered with double-layer Cordura® stretch for abrasion resistance.
• Neoprene Cuff with Watch Cutout: Comfortable wrist fit and freedom of movement.
• Secure Closure: High-quality hook & loop closure covered with TPR; double stitched and resistant to dust/sand.
• Touchscreen Compatible: Conductive suede patches on thumb, index and middle fingers.
• Silicone Grip Print: Enhanced grip on weapons, ropes, textiles and wet/sweaty surfaces.

Certification & Standards

• PPE Category II – protection against moderate risks (EU) 2016/425
• EN ISO 21420:2020 – general requirements for protective gloves
• EN 388:2016 + A1:2018 – 2121XP (mechanical protection)
• EN 407:2020 – X1XXXX (thermal protection – contact heat level 1)

EN 388 rating 2121XP indicates performance levels for abrasion, cut (coup test), tear and puncture resistance; letters indicate additional test results (TDM cut test).

Intended Use

• Professional tactical use: weapon handling, patrolling and related operations
• Radio and equipment operation requiring high precision
• Basic impact protection for accidental knocks on the knuckle area

These gloves are not intended to protect against high-impact mechanical risks (severe cuts/punctures) or chemical, biological and electrical hazards. No flame protection is claimed; avoid contact with open flame.

Available Colors

• Black
• Coyote Brown
• Wolf Grey

Available Sizes

Unisex model – sizes 6 (XS) to 12 (3XL).

Size Chart (mm)

How to measure:
• Measure hand circumference around the knuckles (without the thumb).
• Measure hand length from the wrist crease to the tip of the middle finger.

Care & Maintenance

• Not machine washable. Clean with a damp cloth or rinse with mild/cold water and hang dry.
• Always inspect before and after use (seams, holes, cracks, discoloration, worn parts).
• Do not repair damaged gloves – replace if damage or serious contamination is detected.
• Store in a cool, dry, dark place in original packaging; avoid direct sunlight.

User Manual

• Instructions for Use (PDF) – MoG Target Combat 9106
• Official Size Chart (PDF)

EU Declaration of Conformity

Download EU Declaration of Conformity (PDF)

FAQ

Glossary

• DexSuede: Thin synthetic suede engineered for high dexterity and tactile feedback.
• D3O®: Impact-absorbing material used in protective gear, designed to soften and disperse energy on impact.
• C-Grip Construction: Reinforced design improving durability and helping protect the index finger area during weapon handling.
• EN 388: European standard for protective gloves against mechanical risks.
• EN 407: European standard for protective gloves against thermal risks (heat and/or fire).
• PPE Category II: Personal protective equipment for protection against moderate risks, requiring certified conformity.

Manufacturer / GPSR Information

Masters of Gloves BV
Nederweg 4
8870 Izegem
Belgium
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.MoGgloves.com

Specifications may change without notice as part of continuous product development.